Dedicated to pushing innovation in splitboarding since 2006
866.725.2085
Email: Luke@sparkrandd.com
Spark R&D
2115 Industrial Drive Bozeman, MT 59715
Splitboarder: Ettore Personnettaz // Photo: Pierre Lucianaz
ASYM RIP 'N' FLIP HIGHBACKS
Our Asym Rip ‘N’ Flip Highbacks are durable, ergonomic, and feature our famous split-specific forward lean adjuster that toggles easily between tour and ride mode. They are available à la carte in both the moderate flex Arc ST and the stiffer Surge ST models. The highbacks are backwards compatible with all our T1, Tesla, and pin-mount bindings.
Weight:
Arc ST: 3.35oz/ea (95g) - 6.7 oz/pr (190g)
Surge ST: 3.49oz/ea (99g) - 6.98 oz/pr (198g)
PILLOW LINE STRAPS
We offer Pillow Line strap sets à la carte so everyone can enjoy the weight savings, performance, and durability in this molded one-piece waterproof construction. Ankle straps come in Arc ST & Surge ST models. Toe straps come unisex in just one model. All straps come complete with buckles, plastics, and necessary hardware.
Weight:
Pillow Line Complete Ankle: Arc ST: 8.40 oz/pr (242g) / Surge ST 8.80 oz/pr (252g) - M
Pillow Line Complete Toe: 4.40 oz/pr (126g) - M
T1 STEP LOCKER
The option to lock your heel while touring helps you better adapt to diversified terrain types where quick descents, side stepping, and skate-splitting become more effective means of backcountry travel. Our Step Lock design makes it easier than ever.
FEATURES
- Rotate lever to locked position, then step down to lock heel
- Plastic lock bar grabs underneath the baseplate without wearing either piece
- Heel stays locked until you rotate the lever to the unlocked position
- Locker held securely in both locked and unlocked positions
- Locker assembly screws in under heel rest
- Forward releasable for added safety
- Compatible with all Tesla T1 bindings
Weight: 1.5 oz/ea (42g) - 3.0 oz/pr (84g)
ST WHAMMY BARS
We overmold a sleeve of plastic on both sides of the bar, right where the wire contacts the baseplate. This reduces friction allowing for super smooth movement into and out of high, low, and stowed positions.
Note: the ST whammy bar is not backward compatible with the Arc, Surge or other previous models due to a geometry change in both the baseplate and wire.
Our original Whammy Bars are also available.
Weight: 1.34 oz/pr (38g)
BASEPLATE PADDING
Reduce foot fatigue on long tours and increase insulation on arctic days with our Baseplate Padding Kit. This is an easy retrofit to make your Spark bindings feel a bit more cozy. Padding kits also include a pad for the baseplate snap ramp.
Weights:
1.2 oz/pr (34g) - Cutout Size 3
2.05 oz/pr (58g) - Solid Size 3
T1 RISER KIT
Big Feet? We’ve got you covered. Our riser kit screws in underneath touring brackets and heel rests to raise you up. This increases the binding rotation angle while touring to prevent toe strike and increase stride length. Compatible with all Tesla T1 bindings.
Weight: 5.43 oz/pr (154g)
ASYM RIP 'N' FLIP HIGHBACKS
Our Asym Rip ‘N’ Flip Highbacks are durable, ergonomic, and feature our famous split-specific forward lean adjuster that toggles easily between tour and ride mode. They are available à la carte in both the moderate flex Arc ST and the stiffer Surge ST models. The highbacks are backwards compatible with all our T1, Tesla, and pin-mount bindings.
Weight:
Arc - 3.35 oz/ea (95g) - 6.7 oz/pr (190g)
Surge 3.49 oz/ea (99g) - 6.98 oz/pr (198g)
PILLOW LINE STRAPS
We offer Pillow Line strap sets à la carte so everyone can enjoy the weight savings, performance, and durability in this molded one-piece waterproof construction. Ankle straps come in Men’s and Women’s Arc & Surge models. Toe straps come unisex in just one model. All straps come complete with buckles, plastics, and necessary hardware.
Weight:
Pillow Line Complete Ankle: Arc: 8.40 oz/pr (242g) / Surge 8.80 oz/pr (252g) - M
Pillow Line Complete Toe: 4.40 oz/pr (126g) - M
T1 STEP LOCKER
The option to lock your heel while touring helps you better adapt to diversified terrain types where quick descents, side stepping, and skate-splitting become more effective means of backcountry travel. Our Step Lock design makes it easier than ever.
FEATURES
- Rotate lever to locked position, then step down to lock heel
- Plastic lock bar grabs underneath the baseplate without wearing either piece
- Heel stays locked until you rotate the lever to the unlocked position
- Locker held securely in both locked and unlocked positions
- Locker assembly screws in under heel rest
- Forward releasable for added safety
- Compatible with all Tesla T1 bindings
Weight: 1.5 oz/ea (42g) - 3.0 oz/pr (84g)
WHAMMY BARS
We overmold a sleeve of plastic on both sides of the bar, right where the wire contacts the baseplate. This reduces friction allowing for super smooth movement into and out of high, low, and stowed positions.
Note: the ST Whammy Bar is not backward compatible with the Arc, Surge or other previous models due to a geometry change in both the baseplate and wire.
Our original Whammy Bars are also available.
Weight: 1.34 oz/pr (38g)
BASEPLATE PADDING
Reduce foot fatigue on long tours and increase insulation on arctic days with our Baseplate Padding Kit. This is an easy retrofit to make your Spark bindings feel a bit more cozy. Padding kits also include a pad for the baseplate snap ramp.
Weights:
1.2 oz/pr (34g) - Cutout Size 3
2.05 oz/pr (58g) - Solid Size 3
T1 RISER KIT
Big Feet? We’ve got you covered. Our riser kit screws in underneath touring brackets and heel rests to raise you up. This increases the binding rotation angle while touring to prevent toe strike and increase stride length. Compatible with all Tesla T1 bindings.
Weight: 5.43 oz/pr (154g)
