Dedicated to pushing innovation in splitboarding since 2006
866.725.2085
Email: Luke@sparkrandd.com
Spark R&D
2115 Industrial Drive Bozeman, MT 59715
Splitboarder: Nick Russell // Photo: Danny Kern
SPARK FLAT PUCKS
Channel-like stance adjustability for splitboards built with inserts. This breakthrough in design has riders beyond stoked, and has made Spark Pucks our most popular splitboard accessory.
FEATURES
- Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity
- Bindings slide on soft nylon material for effortless transitions
- Near-infinite adjustability, for your perfect stance and placement:
+/- ¼” (6.5mm) toe/heel adjustment in .05” (1.3mm) increments
+/- 30° range of angle adjustment in 3° increments
Stance width adjustments in .17” (4.2mm) increments - Works with all puck compatible splitboard bindings
Weight: 10.19 oz/pr (289g)
SPARK CANTED PUCKS
Our canted version has all the same great features as our Spark Pucks. With 3° canting to reduce strain, your knees will thank you.
Weight: 11.36 oz/pr (322g)
SPARK SOLID BOARD FLAT PUCKS
We have the quiver game dialed with our Solid Board Pucks, because let’s face it, sometimes you’re just not on your split. Great for solid board mountaineering, snowmo-boarding, trips where you are traveling with multiple boards, or days when you may see a mix of resort riding and splitting. You may have a quiver of boards, but you only need one set of bindings.
FEATURES
- Near-infinite adjustability, just like our Spark Pucks:
+/- ¼” (6.5mm) toe/heel centering adjustment
in .08” (2.1mm) increments - -12° to +30° angular adjustment in 3° increments, covering everyone from jibbers to trench diggers
- Stance width adjustable in .2 inch (5mm) increments
- Can be used with 4x2 insert and channel boards
- Lightweight
- Works with all puck compatible splitboard bindings
Weight: 10.09 oz/pr (286g)
SPARK SOLID BOARD CANTED PUCKS
Our canted version has all the same great features of our standard Spark Solid Board Pucks, only with 3° canting to reduce knee strain.
Weight: 11.5 oz/pr (326g)
MOLDED FIXIE CLIPS
For 25/26 we are adding a molded version of our Fixie Clips to the line. These clips are made from a custom glass-reinforced thermoplastic and maintain the same built-in adjustability with no moving parts. The material is wear-resistant and more economical, making these a good choice for someone looking for performance and affordability over the bomb-proof aluminum option.
Compatibility: Molded Fixie Clips come in both through-mount and top-mount styles to accommodate any board construction.
Weight: 1.9 oz/set (56g)
Through-Mount
Top-Mount
FIXIE CLIPS
Our Spark Fixie Clip comes in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.
Compatibility: Fixie Clips come in both through-mount and top-mount styles to accommodate any board construction.
Through-Mount Fixie Clips
Through-Mount // Weight: 2.26 oz/pr (64g)
Top-Mount Fixie Clips
Top-Mount // Weight: 1.98 oz/pr (56g)
OEM Fixie Clips are available for board manufacturers.
SPARK TIP & TAIL CLIPS
Our tip and tail clip design offers a custom fit to match the variability in any board. With five progressively tighter notches you can get your board as tight as you want. No need to freeze your fingers, this clip is effortlessly operated with your gloves on.
Weight: 0.56 oz/pr (16g)
ST 2ND BOARD KIT
Set up another splitboard to be tour-ready. Comes with screws, heel rests, and ST Touring Brackets. Pair this up with some Spark Pucks and your 2nd board is ready to go.
Compatible with all Tesla T1 bindings.
Weight: 5.60 oz/pr (161g)
ST BRACKET KIT
We overmold our custom plastic blend over and through the bracket holes in the aluminum base, for super smooth touring and maximum durability.
Weight: 2.8 oz/pr (85g)
BACKCOUNTRY KIT
Everything you need to keep a pow day from being cut short. Includes spare plastics, screws, and buckles.
Weight: 5.64 oz/pr (160g)
PRO BACKCOUNTRY KIT
A Backcountry Kit specifically for splitboarders using our Pro Series bindings. Includes same spare parts as standard BC Kit but with Pebax® plastics and pro series aluminum hardware.
Weight: 5.20 oz/pr (148g)
BINDING HARDWARE KIT
A minimal kit with all the basic hardware: screws, washers,
t-nuts, and good Karma.
Weight: 2.0 oz/pr (59g)
PRO BINDING HARDWARE KIT
A top-of-the-line hardware kit for our Pro binding users.
Weight: .8 oz/pr (25g)
SPARK TOOL
Your best friend in the backcountry, this tool has everything you need to adjust your splitboard and binding setup. Even includes a board scraper.
DEALER SPARE PARTS KIT
All you need to service your entire Spark R&D fleet and your customers’ spare parts requests.
SPARK PUCKS
Channel-like stance adjustability for splitboards built with inserts. This breakthrough in design has riders beyond stoked, and has made Spark Pucks our most popular splitboard accessory.
FEATURES
- Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity
- Bindings slide on soft nylon material for effortless transitions
- Near-infinite adjustability, for your perfect stance and placement:
+/- ¼” (6.5mm) toe/heel adjustment in .05” (1.3mm) increments
+/- 30° range of angle adjustment in 3° increments
Stance width adjustments in .17” (4.2mm) increments - Works with all puck compatible splitboard bindings
Weight: 10.19 oz/pr (289g)
SPARK CANTED PUCKS
Our canted version has all the same great features as our Spark Pucks. With 3° canting to reduce strain, your knees will thank you.
Weight: 11.36oz/pr (322g)
SPARK SOLID BOARD PUCKS
We have the quiver game dialed with our Solid Board Pucks, because let’s face it, sometimes you’re just not on your split. Great for solid board mountaineering, snowmo-boarding, trips where you are traveling with multiple boards, or days when you may see a mix of resort riding and splitting. You may have a quiver of boards, but you only need one set of bindings.
FEATURES
- Near-infinite adjustability, just like our Spark Pucks:
+/- ¼” (6.5mm) toe/heel centering adjustment
in .08” (2.1mm) increments - -12° to +30° angular adjustment in 3° increments, covering everyone from jibbers to trench diggers
- Stance width adjustable in .2 inch (5mm) increments
- Can be used with 4x2 insert and channel boards
- Lightweight
- Works with all puck compatible splitboard bindings
Weight: 10.09 oz/pr (286g)
SPARK SOLID BOARD CANTED PUCKS
Our canted version has all the same great features of our standard Spark Solid Board Pucks, only with 3° canting to reduce knee strain.
Weight: 11.5 oz/pr (326g)
FIXIE CLIPS
Our Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.
Compatibility: Fixie Clips come in both through-mount and top-mount styles to accommodate any board construction.
Through-Mount Fixie Clips
Through-Mount // Weight: 2.26 oz/pr (64g)
Top-Mount Fixie Clips
Top-Mount // Weight: 1.98oz/pr (56g)
OEM Fixie Clips are available for board manufacturers.
MOLDED FIXIE CLIPS
For 25/26 we are adding a molded version of our Fixie Clips to the line. These clips are made from a custom glass-reinforced thermoplastic and maintain the same built-in adjustability with no moving parts. The material is wear-resistant and more economical, making these a good choice for someone looking for performance and affordability over the bomb-proof aluminum option.
Compatibility: Molded Fixie Clips come in both through-mount and top-mount styles to accommodate any board construction.
Weight: 1.9oz/set (56g)
Through-Mount
Top-Mount
SPARK TIP & TAIL CLIPS
Our tip and tail clip design offers a custom fit to match the variability in any board. With five progressively tighter notches you can get your board as tight as you want. No need to freeze your fingers, this clip is effortlessly operated with your gloves on.
2ND BOARD KIT
Set up another splitboard to be tour-ready. Comes with screws, heel rests, and ST Touring Brackets. Pair this up with some Spark Pucks and your 2nd board is ready to go.
Compatible with all Tesla T1 bindings.
ST BRACKET KIT
We overmold our custom plastic blend over and through the bracket holes in the aluminum base, for super smooth touring and maximum durability.
BACKCOUNTRY KIT
Everything you need to keep a pow day from being cut short. Includes spare plastics, screws, and buckles.
PRO BACKCOUNTRY KIT
A Backcountry Kit specifically for splitboarders using our Pro Series bindings. Includes same spare parts as standard BC Kit but with Pebax® plastics and pro series aluminum hardware.
BINDING HARDWARE KIT
A minimal kit with all the basic hardware: screws, washers, t-nuts, and good Karma.
PRO BINDING HARDWARE KIT
A top-of-the-line hardware kit for our Pro binding users.
DEALER SPARE PARTS KIT
All you need to service your entire Spark R&D fleet and your customers’ spare parts requests.
SPARK TOOL
Your best friend in the backcountry, this tool has everything you need to adjust your splitboard and binding setup. Even includes a board scraper.